What Mounting Plate Will Fit an MX 2000P Tripod?
If you have lost the quick-release plate for your MX 2000P tripod, you’ve likely realized that a "standard" plate from a local camera store might not fit. The MX 2000P (frequently branded by Vivitar or Targus) utilizes a specific tapered wedge design. To get your camera back on its legs, you need to match the base dimensions of the plate to the tripod head's "well."
The Vital Dimensions for the MX 2000P Plate
The MX 2000P typically requires a 44mm x 44mm (approx. 1.75 inches) square base quick-release plate. However, the most critical part is the bottom taper. When searching for a replacement, look for these specifications:
- Base Size: 44mm (width) x 44mm (length).
- Screw Type: Standard 1/4"-20 camera mounting screw.
- Material: Usually high-impact plastic with a cork or rubber top grip.
Top Compatible Replacement Plates
Since the "MX 2000P" name is used across multiple distributors, several plates are interchangeable. In 2026, the following models are the most reliable fits:
- Vivitar VIV-2000P Plate: The direct OEM replacement specifically designed for the MX and VIV series tripods.
- Targus TG-P60T / MX2000P-RP: A common alternative that shares the exact same mold and locking clip mechanism.
- Universal 44mm QR Plate: Often found on online marketplaces listed as "Quick Release Plate for 44mm Tripod Head."
How to Measure Your Tripod Head for a Perfect Fit
If you aren't sure if your specific MX 2000P is the standard version, you can verify by measuring the tripod head opening (the "well") where the plate sits:
| Measurement Area | Standard MX 2000P Size | Verification Note |
|---|---|---|
| Inner Width | 44mm | Measure the widest part of the opening. |
| Locking Lip | Beveled/Tapered | The plate must be thinner at the bottom than the top. |
| Mounting Bolt | 1/4 Inch | Universal for almost all consumer cameras. |
Common Issues When Using Third-Party Plates
While many "44mm" plates look identical, slight variations in the locking lever depth can cause issues. If the plate feels loose once the lever is closed:
- The Shim Trick: Apply a small strip of electrical tape to the side of the plate to increase its width by a fraction of a millimeter.
- Check the Pin: Ensure your replacement plate has a "video pin" (the small plastic spring-loaded nub) if you are using a camcorder, though this can be removed for DSLR use.
Conclusion
To restore your MX 2000P tripod, you need a 44mm x 44mm square quick-release plate. Brands like Vivitar and Targus offer the most consistent compatibility. Always verify the dimensions before purchasing, as even a 1mm difference can result in a "wobbly" camera mount that compromises your long-exposure shots.
Keywords
MX 2000P tripod plate, Vivitar MX 2000P quick release, 44mm tripod mounting plate, Targus MX 2000P replacement, quick release plate dimensions, buy tripod plate 2026, VIV-2000P mounting plate, tripod accessories, camera gear compatibility.
